Need Some Help?

Easy ways to get the answers you need.

Corinex HD200 Powerline Wall Mount (F) Enterprise

Corinex HD200 Powerline Wall Mount (F) Enterprise

The HD200 Wall Mount (Female) Adapter is the latest addition to the Corinex HD200 Enterprise product family. Complementing our existing HD200 series of products, this Customer Premise Equipment (CPE) device provides endpoint network access for users in Multi-Dwelling Units (MDU) and other high-density installations. Providing up to 200 Mbps of raw bandwidth, and designed with maximum flexibility in mind when it comes to network deployments, the HD200 Wall Mount Female Adapter is ideal in situations where additional cabling cannot be installed and/or setup and installation costs must be minimized.

Powerline technology has several advantages over existing network technologies, not least of which is that once a network is extended into and through the electrical lines in a building, virtually every outlet on the same circuit has the potential to provision high-speed network services.

The built-in power socket allows the existing electrical outlet to be used without obstruction, no re-routing of power cables are needed here.

Product Information

Up to 200 Mbps high-capacity BPL processor

10/100BaseT Fast Ethernet interface

Bridge Forwarding Table for 64 MAC Addresses

802.1Q VLAN & Optimized VLANs

Powerful DES/3DES/AES-128 encryption

OFDM technology and powerful error correction mechanisms allow robust performance under harsh conditions in the electrical network

Integrated 802.1D Ethernet Bridge With Optimized Spanning Tree Protocol

RADIUS authentication support

Programmable bandwidth support

8-level priority queues, with programmable priority-classification engine

Priority classification according to 802.1P tags, IP coding (IPv4 or IPv6) or TCP source/destination ports

Optimized IGMP support for broadcast and multicast traffic

MAC address filtering supported

Remote configuration via telnet or Corinex SmartGrid Netman software


IEEE Standards Compliance

Safety & EMI
  • EN 55022 EMC limits
  • UL/EN 60950
  • FCC Part 15 B
Power Input
  • 100 – 240 VAC, 50/60 Hz
Power Consumption
  • 3.85 W (max)
LED Status Lights
  • Power
  • PLC Link/Activity
  • AP/End Point
  • 10/100BaseT Fast Ethernet port
  • AC Power Outlet (16 A)
  • Multifunction pushbutton
  • 200 Mbps (max) on physical layer
Frequency Range
  • 2 – 34 MHz
Transmit Power Spectral Density
  • -58 dBm/Hz
Product Dimensions (L × W × D)
  • 134 mm × 68 mm × 41 mm
  • Plug length varies with region
Operating Temperature
  • 0 to 40 °C (32 to 104 °F)
Operating Humidity
  • 10% to 80% non-condensing



Enterprise Adapter


CAT5 Ethernet Cable


Instruction CD & Warranty Card